FTO 011 (NC), Thermostat, Tamper-proof (Pre-set) 15°C
Item code: ST.01160.0-01
Condition: New product
Manufacturer: STEGO
FTO 011 Tamper-proof (Pre-set) Thermostat:.
Switch-off temperature: +25°C / +77°F (±5K tolerance);
Switch-on temperature: +15°C / +59°F (±5K tolerance).
STEGO 01160.0-01
10 pcs on stock
Data sheet
| Product type | Thermostat |
| Switching function | NC (Heating) |
| Power supply voltage | 230V AC |
| Temperature setting range | Tamper-proof (Pre-set) |
| Switch-off temperature | +25°C (+77°F) |
| Switch-on temperature | +15°C (+59°F) |
| Maximum inrush current | AC 16 A for 10 sec |
| Operating temperature | -45°C ... +80°C |
| Degree of protection | IP20 |
| Approvals | VDE, UL |
More info
Tamper-proof (Pre-set) Thermostat FTO 011: Contact breaker/NC (red casing) for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. The contact opens when temperature is rising.
| Sensor element | thermostatic bimetal |
|---|---|
| Contact type | snap-action contact |
| Service life | > 100,000 cycles |
| Max. switching capacity | 250VAC, 5 (1.6) A / 120VAC, 10 (2) A DC 30W |
| Max. inrush current | AC 16A for 10 sec. |
| Connection | 2-pole terminal, clamping torque 0.8Nm max.: rigid/stranded1 wire 2.5mm² (AWG 14) |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Casing | red top, plastic according to UL94 V-0, light grey |
| Dimensions | 47 x 33 x 33mm |
| Weight | approx. 30g |
| Fitting position | variable |
| Operating/Storage temperature | -40 to +80°C (-40 to +176°F) / -45 to +80°C (-49 to +176°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type | IP20 |
| Approvals | VDE, UL File No. E164102, EAC |
¹ When connecting with stranded wires, wire end ferrules must be used.
| Art. No. | Contact | Switch-off temperature | Switch-on temperature |
|---|---|---|---|
| 01160.0-01 | Contact breaker (NC) | +25°C / +77°F (±5K tolerance) | +15°C / +59°F (±5K tolerance) |
