Fan Heater CSL028, 400W, 230VAC
Item code: ST.02810.0-00
Condition: New product
Compact Semiconductor Fan Heater CSL 028.
Heating capacity 400W.
Supply voltage 230VAC.
1 Item Items Warning: Last items in stock!
|Product type||Fan Heater|
|Power supply voltage||230 VAC|
|Maximum inrush current||15 A|
|Operating temperature||-45°C ... +70°C|
|Degree of protection||IP20|
|Approvals||VDE, UL, EAC|
These fan heaters prevent formation of condensation and provide an evenly distributed interior air temperature in enclosures with electric/electronic components. The heaters are connected using the internal terminal connectors. The small size of the CS / CSL 028 heaters make them ideal for use in enclosures where space is at a premium.
|Heating element||PTC resistor - temperature limiting|
|Axial fan, ball bearing||air flow, free flow
CS 028: 13.8m³/h
CSL 028: 45m³/h (230VAC), 54m³/h (120VAC)
service life 40,000h at +40°C (+104°F)
|Connection||2-pole clamp max. 2.5mm² (CSL 028 with strain relief),
clamping screw torque 0.8Nm max.
|Casing||plastic according to UL94 V-0, black|
|Mounting||clip for 35 mm DIN rail, EN 60715 or screw fixing (Ø 5.3mm)|
|Fitting position||vertical airflow (air outlet up)|
|Operating/Storage temperature||-45 to +70°C (-49 to +158°F)|
|Operating/Storage humidity||max. 90% RH (non-condensing)|
|Protection type/Protection class||IP20 / II (double insulated)|
|Note||other voltages on request|
|02810.0-00||230VAC, 50/60Hz||400W||15.0A||16.0A||0.5kg||VDE||UL File No. E234324||EAC|
Recommended related products
KTO 011: Thermostat (NC); contact breaker for regulating heaters. The contact opens when temperature is rising. Identical model, just with additional UL certificate is an article ST.01146.9-00In Stock
KTO 011: Thermostat (NC); contact breaker for regulating heaters. The contact opens when temperature is rising. UL approval.Out of stock
FTO 011 Tamper-proof (Pre-set) Thermostat: Contact breaker / NC (red casing) for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. The contact opens when temperature is rising. Switch-off temperature: +15°C / +59°F (±5K tolerance); Switch-on temperature: +5°C / +41°F (±5K tolerance).Out of stock