FTO 011(NC), Termostatas šildytuvui, fix. 15°C
Prekės kodas: ST.01160.0-01
Būklė: Nauja prekė
Gamintojas: STEGO
FTO 011 Tamper-proof (Pre-set) Thermostat.
Switch-off temperature: +25°C / +77°F (±5K tolerance);
Switch-on temperature: +15°C / +59°F (±5K tolerance).
STEGO 01160.0-01
Šiuo metu prekės neturime
Charakteristikos
Produkto tipas | Termostatas |
Veikimo funkcija | NC (Šildymas) |
Maitinimo įtampa | 230V AC |
Temperatūros nustatymo diapazonas | Tamper-proof (Pre-set) |
Switch-off temperature | +25°C (+77°F) |
Switch-on temperature | +15°C (+59°F) |
Maksimali pradinė srovė | AC 16 A for 10 sec |
Darbinė temperatūra | -45°C ... +80°C |
Apsaugos klasė | IP20 |
Patvirtinimai | VDE, UL, EAC |
Apie prekę
Tamper-proof (Pre-set) Thermostat FTO 011: Contact breaker/NC (red casing) for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. The contact opens when temperature is rising.
Sensor element | thermostatic bimetal |
---|---|
Contact type | snap-action contact |
Service life | > 100,000 cycles |
Max. switching capacity | 250VAC, 5 (1.6) A / 120VAC, 10 (2) A DC 30W |
Max. inrush current | AC 16A for 10 sec. |
Connection | 2-pole terminal, clamping torque 0.8Nm max.: rigid/stranded1 wire 2.5mm² (AWG 14) |
Mounting | clip for 35mm DIN rail, EN 60715 |
Casing | red top, plastic according to UL94 V-0, light grey |
Dimensions | 47 x 33 x 33mm |
Weight | approx. 30g |
Fitting position | variable |
Operating/Storage temperature | -40 to +80°C (-40 to +176°F) / -45 to +80°C (-49 to +176°F) |
Operating/Storage humidity | max. 90% RH (non-condensing) |
Protection type | IP20 |
Approvals | VDE, UL File No. E164102, EAC |
¹ When connecting with stranded wires, wire end ferrules must be used.
Art. No. | Contact | Switch-off temperature | Switch-on temperature |
---|---|---|---|
01160.0-01 | Contact breaker (NC) | +25°C / +77°F (±5K tolerance) | +15°C / +59°F (±5K tolerance) |