Photoelectric Sensor SMP8500PGJ
Item code: SMP8500PGJ
Condition: New product
Manufacturer: TELCO
Diffuse Proximity Sn=0,5m, PNP NO/NC, connector M12
This product is no longer in stock
Data sheet
| Sensor shape | Cylindrical |
| Housing (mounting) size | M18x1 |
| Material | Polycarbonate, PC |
| Rated operating distance | 500 mm |
| Sensor length | 75 mm |
| Product type | Diffuse Proximity |
| Connector | M12x1 |
| Switching function | Normally open/closed, (programmable NO/NC) |
| Output type | PNP |
| Power supply voltage | 10-30 VDC |
| Degree of protection | IP67 |
| Sensor type | Photoelectric sensors |
More info
Product Data
| Operation Mode | Diffuse Proximity |
| Function | Both |
| Supply Voltage | 10 - 30 V dc |
| Light Source | Infrared (880 nm) |
| Control Feature | Sensitivity pot. and light/dark switch |
| Sensing Range | 0,5 m |
| Output | PNP |
| Output Status | N.C./N.O. |
| Housing | M18 x 1 |
| Housing Material | Plastic |
| Connection | 4 pin, M12 plug |
Technical Data
| Supply Voltage | 10 - 30 V dc |
| Voltage Ripple | 15 % |
| Reverse Polarity Protected | Yes |
| Short Circuit Protected | Yes |
| Current Consumption | 14 mA |
| Max. Output Load | 120 mA / 30 V dc |
| Max. Residual Voltage | 1,5 V |
| Max. Operation Frequency | 250 Hz |
| Response Time ton / toff | 2 ms / 2 ms |
| Power On Indicator | Green LED |
| Output Indicator | Yellow LED |
| Hysteresis | Approx. 5 - 15 % |
| Opening Angle | +/- 4° |
| Housing Material, Front Lens | Polycarbonate |
| Housing Material, Sensor Housing | Polycarbonate |
Environmental Data
| Vibration | 10 - 55 Hz, 0,5 mm |
| Shock | 30 g |
| Operation Temperature | -20 to +60 °C |
| Storage Temperature | -40 to +80 °C |
| Sealing Class | IP 67 |
| Light Immunity 15˚ | > 40 000 lux |
