Triangulation sensor (BGS) OBT300-R100-2EP-IO-V31-L

Item code: PF.267075-0059

Condition: New product


Laser triangulation sensor with adjustable background suppression.

Rectangular, 2 push-pull (4-in-1) outputs, Sn=7...300mm, Smart Sensor, IO-Link, connector M8x1, 4-pin, PC housing, IP67/IP69/IP69K. 

Pepperl+Fuchs OBT300-R100-2EP-IO-V31-L. 

Code: PF.267075-0059.

This product is no longer in stock

133,00 € tax excl.

Data sheet

Sensor shape Rectangle
Housing (mounting) size 11 x 44,5 x 21,5mm Rectangular
Material Polycarbonate, PC
Rated operating distance 7...300 mm adjustable
Product type Background suppression
Connector M8x1
Number of contacts 4
Switching function 2 NO/NC adjustable
Output type PNP/NPN
Power supply voltage 10-30 VDC
Operating temperature -40°C ... +60°C
Degree of protection IP69K
Sensor type Photoelectric sensors

More info

Product Description
Laser diffuse mode sensor with adjustable background suppression
General specifications
Detection range 7 ... 300 mm
Detection range min. 7 ... 25 mm
Detection range max. 7 ... 300 mm
Adjustment range 25 ... 300 mm
Reference target standard white, 100 mm x 100 mm
Light source laser diode
Light type modulated visible red light
Laser nominal ratings
Laser class 1
Wave length 680 nm
Beam divergence > 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Pulse length 3 µs
Repetition rate approx. 13 kHz
max. pulse energy 10.4 nJ
Black-white difference (6 %/90 %) < 5 % at 150 mm
Diameter of the light spot approx. 1 mm at a distance of 200 mm
Opening angle approx. 0.3 °
Ambient light limit EN 60947-5-2 : 40000 Lux
Functional safety related parameters
MTTFd 560 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicator LED yellow:
constantly on - object detected
constantly off - object not detected
Control elements Light-on/dark-on changeover switch
Control elements Sensing range adjuster
Electrical specifications
Operating voltage 10 ... 30 V DC
Ripple max. 10 %
No-load supply current < 20 mA at 24 V supply voltage
Protection class III
Interface type IO-Link ( via C/Q = pin 4 )
IO-Link revision 1.1
Device profile Smart Sensor
Device ID 0x110602 (1115650)
Transfer rate COM2 (38.4 kBit/s)
Min. cycle time 2.3 ms
Process data width Process data input 1 Bit
Process data output 2 Bit
SIO mode support yes
Compatible master port type A
Switching type The switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
/Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Signal output 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop ≤ 1.5 V DC
Switching frequency 1650 Hz
Response time 300 µs
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Laser safety EN 60825-1:2014
Approvals and certificates
EAC conformity TR CU 020/2011
UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
FDA approval IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature -40 ... 60 °C (-40 ... 140 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width 11 mm
Housing height 44.5 mm
Housing depth 21.5 mm
Degree of protection IP67 / IP69 / IP69K
Connection M8 x 1 connector, 4-pin
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 10 g

To adjust the sensitivity, use a screwdriver with a PH1 tip.

Recommended - WERA Kraftform Micro 2050 series WR.118023.

Recommended related products



Sign up today for free and be the first to get notified on our new updates, discounts and special Offers.