Triangulation sensor (BGS) OBT300-R100-2EP-IO-V31-L
Reference: PF.267075-0059
Condition: New product
Manufacturer: PEPPERL+FUCHS
Laser triangulation sensor with adjustable background suppression.
Rectangular, 2 push-pull (4-in-1) outputs, Sn=7...300mm, Smart Sensor, IO-Link, connector M8x1, 4-pin, PC housing, IP67/IP69/IP69K.
Pepperl+Fuchs OBT300-R100-2EP-IO-V31-L.
Code: PF.267075-0059.
23 Items
Data sheet
| Jutiklio forma | Stačiakampis |
| Korpuso (montavimo) dydis | 11 x 44,5 x 21,5mm Stačiakampis |
| Материал | Polikarbonatas, PC |
| Veikimo atstumas | 7...300 mm reguliuojamas |
| Тип изделия | Background suppression |
| Коннектор | M8x1 |
| Количество контактов | 4 |
| Функция переключения | 2 NO/NC reguliuojamas |
| Тип выходов | PNP/NPN |
| Напряжение питания | 10-30 VDC |
| Температура эксплуатации | -40°C ... +60°C |
| Степень защиты | IP69K |
| Тип датчика | Оптические датчики |
More info
| Product Description | ||
|---|---|---|
| Laser diffuse mode sensor with adjustable background suppression | ||
| General specifications | ||
|---|---|---|
| Detection range | 7 ... 300 mm | |
| Detection range min. | 7 ... 25 mm | |
| Detection range max. | 7 ... 300 mm | |
| Adjustment range | 25 ... 300 mm | |
| Reference target | standard white, 100 mm x 100 mm | |
| Light source | laser diode | |
| Light type | modulated visible red light | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT STARE INTO BEAM | |
| Laser class | 1 | |
| Wave length | 680 nm | |
| Beam divergence | > 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm | |
| Pulse length | 3 µs | |
| Repetition rate | approx. 13 kHz | |
| max. pulse energy | 10.4 nJ | |
| Black-white difference (6 %/90 %) | < 5 % at 150 mm | |
| Diameter of the light spot | approx. 1 mm at a distance of 200 mm | |
| Opening angle | approx. 0.3 ° | |
| Ambient light limit | EN 60947-5-2 : 40000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 560 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
|
| Function indicator | LED yellow: constantly on - object detected constantly off - object not detected |
|
| Control elements | Light-on/dark-on changeover switch | |
| Control elements | Sensing range adjuster | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | max. 10 % | |
| No-load supply current | < 20 mA at 24 V supply voltage | |
| Protection class | III | |
| Interface | ||
| Interface type | IO-Link ( via C/Q = pin 4 ) | |
| IO-Link revision | 1.1 | |
| Device profile | Smart Sensor | |
| Device ID | 0x110602 (1115650) | |
| Transfer rate | COM2 (38.4 kBit/s) | |
| Min. cycle time | 2.3 ms | |
| Process data width | Process data input 1 Bit Process data output 2 Bit |
|
| SIO mode support | yes | |
| Compatible master port type | A | |
| Output | ||
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on |
|
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA , resistive load | |
| Usage category | DC-12 and DC-13 | |
| Voltage drop | ≤ 1.5 V DC | |
| Switching frequency | 1650 Hz | |
| Response time | 300 µs | |
| Conformity | ||
| Communication interface | IEC 61131-9 | |
| Product standard | EN 60947-5-2 | |
| Laser safety | EN 60825-1:2014 | |
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 | |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Housing width | 11 mm | |
| Housing height | 44.5 mm | |
| Housing depth | 21.5 mm | |
| Degree of protection | IP67 / IP69 / IP69K | |
| Connection | M8 x 1 connector, 4-pin | |
| Material | ||
| Housing | PC (Polycarbonate) | |
| Optical face | PMMA | |
| Mass | approx. 10 g | |
To adjust the sensitivity, use a screwdriver with a PH1 tip.
Recommended - WERA Kraftform Micro 2050 series WR.118023.
