FF 018 Filter fan (Airflow IN) 21 m3/h, 230VAC, 97x97mm
Item code: ST.01800.0-00
Condition: New product
FF 018 Filter fan (Airflow IN);
Air volume, free flow: 21 m3/h;
Air volume with exit filter: 16 m3/h;
Operating voltage: 230VAC;
Enclosure cut-out: 97x97mm;
1 Item Items Warning: Last items in stock!
|Product type||Filter fan (Airflow IN)|
|Power supply voltage||230V AC|
|Operating temperature||-10°C ... +70°C|
|Degree of protection||IP54|
|Approvals||VDE, UL, EAC|
|Hole size||97 x 97 mm|
|Air volume, free flow||21 m³/h|
Filter fans are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure, thus expelling heated internal air. The resulting air flow prevents formation of localized hot pockets and protects the electronic components from overheating. These filter fans are intended for indoor use. The plastic used for the hood is highly UV light resistant.
|Axial fan, ball bearing||service life 50,000h at +25°C (+77°F), 65% RH|
|fan body aluminium, rotor plastic|
|Connection||2 wires with pressure clamps 2.5mm², length 100mm|
|Casing (filter fan and exit filter)||plastic according to UL94 V-0, light grey|
|Hood (filter fan and exit filter)||plastic according to UL94 V-0, light grey;|
|UV light resistant according to UL746C (f1)|
|Mounting frame||with double-sided industrial adhesive band for fixing to the|
|outside of enclosure; certain operating circumstances can|
|make the additional use of screws necessary (see drilling|
|template); a template for the enclosure cut-out is included|
|in the delivery of the filter fans|
|Filter mat||G4 acc. to DIN EN 779, filtering degree 94%|
|Filter material||synthetic fibre with progressive construction, temperature|
|resistant to +100°C, self-extinguishing class F1,|
|moisture resistant to 100% RH, reusable - cleaning by|
|washing or vacuuming|
|Operating/Storage temperature||-10 to +70°C (+14 to +158°F) / -40 to +70°C (-40 to +158°F)|
|Operating/Storage humidity||max. 90% RH (non-condensing)|
|Protection class||I (earthed)|
|Approvals||UL File No. E234324, EAC, VDE only: 230V|
- The self-adhesive seal of the mounting frame prevents dust and water from entering the cabinet.
- Functional design of the intake and exit fan hoods very effectively prevents direct intrusion of falling water and dust. The advantage is that the filter mat does not get so quickly contaminated with dirt and thus does not need to be exchanged so often.
- The air channeling makes the filter fan particularly quiet in operation.
- Functional and modern design enables time-saving assembly and maintenance.
- The direction of air flow can easily be switched by reversing the axial fan (sizes 1 to 3).
- EMC versions and other voltages on request.
|Art. No.||Operating voltage||Air volume, free flow||Air volume with exit filter||Current con- sumption||Power con- sumption||Average noise level (DIN EN ISO 4871)||Depth in enclosure||Enclosure cut-out||Weight (approx.)||Protection type|
|01800.0-00||230VAC, 50Hz||21m³/h||16m³/h||80mA||13W||31db (A)||45mm||97 x 97mm + 0.4||0.6kg||IP54|
|01801.0-00||230VAC, 50Hz||55m³/h||42m³/h||100mA||15W||40db (A)||58mm||125 x 125mm + 0.4||1.0kg||IP54/IP551|
|01802.0-00||230VAC, 50Hz||102m³/h||68m³/h||100mA||15W||39db (A)||86mm||176 x 176mm + 0.4||1.3kg||IP54/IP551|
Recommended related products
Compact thermostat for regulating of filter fans and heat exchangers or for switching signal devises when temperature limit has been exceeded. type KTS 011, 0 to +60°C, 1NO (Cooling), IP20. Stego 01141.0-00.In Stock
FZK 011 | Mechanical thermostat | Change-over Contact (Heating/Cooling) 01170.0-00In Stock
Small mechanical thermostat for cooling or signalization systems type KTS 111. 0 to +60°C, 1NO (Cooling), IP20. approvals CE,UL,VDE,EAC. (equivalent to 01141.0-00 and 01147.9-00) Stego 11101.0-00In Stock