PNOZ 11 24 V AC/DC – safety relay
Item code: PZ.774080
Condition: New product
Manufacturer: PILZ
PILZ PNOZ 11 (774080) is a safety relay for monitoring emergency-stop buttons and safety gates. Supply: 24 V AC/DC; fixed screw terminals. 7 instantaneous safety NO + 1 auxiliary NC + 1 semiconductor signal output.
This product is no longer in stock
Data sheet
| Output type | 7 N/O, 1 N/C |
| Power supply voltage | 24 V AC/DC |
| Type of contact terminals | Screw |
| Product Group | PNOZ X |
| Inputs type | 1-/2- channel wiring |
More info
PILZ PNOZ 11, order code 774080, monitors the connected safety circuit for monitoring emergency-stop buttons and safety gates. Its safety contacts provide the switching signal to the machine control system.
Key specifications
| Manufacturer code | 774080 |
|---|---|
| Supply | 24 V AC/DC |
| Input wiring | 1 or 2 channels, depending on wiring |
| Outputs | 7 instantaneous safety NO + 1 auxiliary NC + 1 semiconductor signal output |
| Terminals | fixed screw terminals |
| Housing width | 90 mm |
NO means normally open and NC means normally closed. Auxiliary NC contacts and semiconductor signal outputs indicate status; they do not replace the safety contacts.
What to check before ordering
Seven NO safety contacts provide switching for several separate circuits. Allow 90 mm of cabinet width and check the rating required by each load.
PILZ technical data and documentation. Refer to the operating manual for the exact device for wiring diagrams, load limits and operating conditions.
For selection or delivery information, contact BOPLALIT with code 774080, quantity and application. For a replacement, include a photo of the existing device label and its circuit diagram.
Additional technical data
| Max. current at DC13 I (6 cycles/min) | 7.0 A |
|---|---|
| Max. current at AC15 | 5.0 A |
| Height dimension | 87.0 mm |
| Depth dimension | 121.0 mm |
| Gross weight | 650 g |
| Net weight | 640 g |
| Ambient temperature | -10 - 55 °C |
