Touch-Safe Heater CSF 060, 100W, 120-240V AC, with pre-set thermostat +15°C to +25°C
Item code: ST.06012.0-00
Condition: New product
Manufacturer: STEGO
Compact Semiconductor Fan Heater CSF 060.
Heating capacity 100W.
Supply voltage 120-240VAC.
Integrated pre-set thermostat +15°C to +25°C.
Stego 06012.0-00
This product is no longer in stock
Data sheet
| Product type | Convection Heater |
| Power supply voltage | 120-240V AC |
| Temperature setting range | Tamper-proof (Pre-set) |
| Switch-off temperature | +25°C (+77°F) |
| Switch-on temperature | +15°C (+59°F) |
| Heating capacity | 100W |
| Maximum inrush current | 4.5 A |
| Operating temperature | -40°C ... +70°C |
| Degree of protection | IP20 |
| Approvals | VDE, UL, EAC |
More info
Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design. This model with plug-in thermostat does not require additional wiring. The heaters are designed for permanent operation. This heater is also available in a version without thermostat (CS 060).
| Operating voltage | 120 - 240VAC¹ (min. 110V, max. 265V) |
|---|---|
| Heating element | PTC resistor - temperature limiting |
| Surface temperature | < +80°C (+176°F), except upper protective grille |
| Connection | 2-pole terminal 2.5mm², torque 0.8Nm max. |
| Casing | plastic according to UL94 V-0, black |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Fitting position | vertical airflow (air outlet up, connection on bottom) |
| Operating/Storage temperature | -40 to +70°C (-40 to +158°F) / -45 to +70°C (-49 to +158°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type/Protection class | IP20 / II (double insulated) |
| Approvals | VDE, UL File No. E150057, EAC |
¹ Operating with voltages below 140VAC reduces heating performance by approx. 10%.
|
Art. No. |
Heating capacity² |
Inrush current (max.) |
Recommended (time-delay) |
Air outlet temperature³ |
Switch-off temperature⁴ |
Switch-on temperature⁴ | Dimensions |
Weight (approx.) |
|---|---|---|---|---|---|---|---|---|
| 06001.0-00 | 50W | 2.5A | 4.0A | +86°C (+186.8°F) | +15°C (+59°F) | +5°C (+41°F) | 110x60x90mm | 0.3kg |
| 06002.0-00 | 50W | 2.5A | 4.0A | +86°C (+186.8°F) | +25°C (+77°F) | +15°C (+59°F) | 110x60x90mm | 0.3kg |
| 06011.0-00 | 100W | 4.5A | 8.0A | +120°C (+248°F) | +15°C (+59°F) | +5°C (+41°F) | 110x60x90mm | 0.3kg |
| 06012.0-00 | 100W | 4.5A | 8.0A | +120°C (+248°F) | +25°C (+77°F) | +15°C (+59°F) | 110x60x90mm | 0.3kg |
| 06021.0-00 | 150W | 8.0A | 10.0A | +145°C (+293°F) | +15°C (+59°F) | +5°C (+41°F) | 150x60x90mm | 0.5kg |
| 06022.0-00 | 150W | 8.0A | 10.0A | +145°C (+293°F) | +25°C (+77°F) | +15°C (+59°F) | 150x60x90mm | 0.5kg |
² ambient temperature - see Heating capacity / Ambient temperature diagram; ³ measured 50mm above protective grille; ⁴ tolerance of ±5K
Note: Other switch-off and switch-on temperatures on request.