Fan Heater CSF 028, 250W, 230VAC, with pre-set thermostat +5°C to +15°C
Item code: ST.02821.0-06
Condition: New product
Compact Semiconductor Fan Heater CSF 028.
Heating capacity 250W.
Supply voltage 230VAC.
Integrated pre-set thermostat +5°C to +15°C.
1 Item Items Warning: Last items in stock!
|Product type||Fan Heater|
|Power supply voltage||230V AC|
|Temperature setting range||Tamper-proof (Pre-set)|
|Switch-off temperature||+15°C / +59°F (±5K tolerance)|
|Switch-on temperature||+5°C / +41°F (±5K tolerance)|
|Maximum inrush current||9 A|
|Operating temperature||-40°C ... +70°C|
|Degree of protection||IP20|
|Approvals||VDE, UL, EAC|
The compact fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The touch-safe plastic housing and the small dimensions makes it ideal for use in enclosures with high packing density. The CSF 028 is equipped with a pre-set thermostat. It is connected via external clamps. The fan heater is available with two different mounting systems - either mounting by screw flange or by clip. The robust screw flange fixing is particularly suitable for applications with high vibration.
|Heating element||PTC resistor - temperature limiting|
|Temperature safety cut-out||to protect against overheating in case of fan failure, automatic reset|
|Axial fan, ball bearing||air flow, free flow
CSF 028: 45m³/h (230VAC), 54m³/h (120VAC)
service life 40,000h at +40°C (+104°F)
|Connection||2-pole dual pressure clamp for rigid wire 2.5mm²,
stranded wire (with wire end ferrule) 1.5mm²
|Casing||plastic according to UL94 V-0, black|
|Mounting||clip for 35mm DIN rail, EN 60715 or screw fixing (Ø 5.5mm),
clamping torque 2Nm max., washers have to be used
|Fitting position||vertical airflow (air outlet up)|
|Dimensions||models with clip fixing: 105 x 85 x 118mm,
models with screw flange fixing: 105 x 115 x 108mm
|Operating/Storage temperature||-40 to +70°C (-40 to +158°F)/-45 to +70°C (-49 to +158°F)|
|Operating/Storage humidity||max. 90% RH (non-condensing)|
|Protection type/Protection class||IP20 / II (double insulated)|
|Art. No. clip fixing||Operating voltage||Heating capacity¹||Inrush current max.||Recommended|
pre-fuse T (time-delay)
|Switch-off temperature²||Switch-on temperature²|| Approvals|
|02821.0-06||230VAC, 50/60Hz||250W||9.0A||10.0A||+15°C (+59°F)||+5°C (+41°F)||VDE||UL File No. E234324||EAC|