Fan Heater CR027, 475W, 230VAC, 0 to +60°C
Item code: ST.02700.0-00
Condition: New product
Manufacturer: STEGO
Semiconductor Fan Heater CR027.
Heating capacity 475W.
Supply voltage 230VAC.
Setting range thermostat 0 to +60°C.
Stego 02700.0-00
This product is no longer in stock
Data sheet
| Product type | Fan Heater |
| Power supply voltage | 220-240V AC |
| Temperature setting range | 0 ... +60 °C |
| Heating capacity | 475W |
| Maximum inrush current | 11 A |
| Operating temperature | -45°C ... +70°C |
| Degree of protection | IP20 |
| Approvals | VDE, UL, EAC |
More info
Semiconductor fan heater prevents formation of condensation and frost and provides an evenly distributed interior air temperature in enclosures with electric/electronic components. The integrated thermostat is used to set the desired temperature.
| Heating element | PTC resistor - temperature limiting |
|---|---|
| Temperature safety cut-out | to protect against overheating in case of fan failure, automatic reset |
| Axial fan, ball bearing | airflow see table service life 50,000h at +25°C (+77°F) |
| Connection | 2-pole clamp 2.5mm², clamping torque 0.8Nm max |
| Casing | plastic according to UL94 V-0, light grey |
| Optical indicator | thermostat control lamp |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Fitting position | vertical airflow (air outlet up) |
| Dimensions | 100 x 128 x 165mm |
| Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type/Protection class | IP20 / II (double insulated) |
| Approvals | VDE, UL File No. E204590, EAC |
| Art. No. | Operating voltage | Heating capacity¹ (50Hz) | Heatig capacity¹ (60Hz) | Inrush current max. | Recommended pre-fuse T (time-delay) | Airflow, free flow | Setting range thermostat² | Weight (approx.) |
|---|---|---|---|---|---|---|---|---|
| 02700.0-00 | 220-240VAC, 50/60Hz | 475W | 550W | 11.0A | 10.0A | 35m³/h | 0 to +60°C | 0.9kg |
