IFM LMT100
Prekės kodas: LMT100
Būklė: Nauja prekė
Gamintojas: IFM
Lygio jutiklis LMT100 LMACE-A12E/QSKG/0/US
higieninis, lygio detektavimui maisto ir gėrimų pramonėje,
skysčiams, klampioms ir birioms medžiagoms,
IO-link
tiekimo terminas 1 savaitė
Nuolaida perkant didesnį kiekį
| Kiekis | Kaina | Sutaupote |
|---|---|---|
| 5 | 171,74 € | Iki 175,88 € |
| 10 | 155,19 € | Iki 517,30 € |
Charakteristikos
| Jutiklio forma | Cilindrinis |
| Medžiaga | Nerudijantis plienas |
| Produkto tipas | Lygio taško aptikimo jutiklis |
| Kabelio ilgis | be kabelio |
| Jungtis | M12x1 |
| Kontaktų skaičius | 4 |
| Veikimo funkcija | NO/NC |
| Išėjimo tipas | PNP/NPN |
| Maitinimo įtampa | 18-30 VDC |
| Darbinė temperatūra | -40°C ... +85°C |
| Apsaugos klasė | IP69K |
Apie prekę
Sensor for point level detection.
PNP/NPN, Switching signal: IO-link, G1/2 sealing cone, Connector M12x1, 4-pin, Medium temperature: -40...100°C (oil), -40...100°C (water).
Factory setting - hydrous media.
LMT100 LMACE-A12E/QSKG/0/US
- For the reliable level control in tanks and containers;
- Hygienic design for the requirements of the food and beverage industry;
- Use in liquid and viscous media and bulk materials;
- Differentiation of media by parameterization of the switching outputs;
- Reliable suppression of deposits or foam.
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2 |
| Factory setting | hydrous media |
| Process connection | threaded connection G 1/2 sealing cone |
Application
| Special feature | Gold-plated contacts | ||
| Media | Liquids; viscous media; powder | ||
| Cannot be used for | See the operating instructions, chapter "Function and features". | ||
| Probe length[mm] | 11 | ||
| Tank pressure |
|
||
| MAWP (for applications according to CRN)[bar] | 40 |
| Oil | |
|---|---|
| Medium temperature[°C] | -40...100 |
| Medium temperature short time[°C] | -40...150; (1 h) |
| Water | |
|---|---|
| Medium temperature[°C] | -40...100 |
| Medium temperature short time[°C] | -40...150; (1 h) |
Electrical data
| Operating voltage[V] | 18...30 DC |
| Current consumption[mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Measuring principle | capacitive |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; IO-Link |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] | 2.5 |
| Permanent current rating of switching output DC[mA] | 100 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Factory setting | hydrous media |
Response times
| Response time[s] | < 0.5 |
Interfaces
| Communication interface | IO-Link | ||||
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 | ||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification | ||||
| SIO mode | yes | ||||
| Required master port type | A | ||||
| Process data analogue | 1 | ||||
| Process data binary | 2 | ||||
| Min. process cycle time[ms] | 2.3 | ||||
| Supported DeviceIDs |
|
Operating conditions
| Ambient temperature[°C] | -40...85 | |||
| Note on ambient temperature |
|
|||
| Storage temperature[°C] | -40...85 | |||
| Protection | IP 68; IP 69K |
Tests / approvals
| EMC |
|
||||||
| Shock resistance |
|
||||||
| Vibration resistance |
|
||||||
| MTTF[years] | 223 | ||||||
| UL approval |
|
Mechanical data
| Weight[g] | 169.5 |
| Dimensions[mm] | Ø 30 / L = 113 |
| Materials | stainless steel (316L/1.4404); PEEK; PEI; FKM |
| Materials (wetted parts) | PEEK; surface characteristics: Ra < 0,8 / Rz 4 |
| Process connection | threaded connection G 1/2 sealing cone |
Displays / operating elements
| Display |
|
Remarks
| Pack quantity | 1 pcs. |
Electrical connection
| Connection | Connector: 1 x M12; coding: A; Contacts: gold-plated |