MFR 012 reguliuojamas higrostatas 35-95% RH, 1NC/NO, 20-250VAC
Prekės kodas: ST.01220.0-00
Būklė: Nauja prekė
Gamintojas: STEGO
Reguliuojamas higrostatas MFR 012, 35-95% RH, 1NC/NO, 20-250VAC.
01220.0-00
6 Prekės
Charakteristikos
| Produkto tipas | Drėgmės reguliatorius |
| Veikimo funkcija | Change-over Contact (Šildymas/Aušinimas) |
| Maitinimo įtampa | 230V AC |
| Darbinė temperatūra | 0°C ... +60°C |
| Apsaugos klasė | IP20 |
| Patvirtinimai | VDE, UL, CCC, EAC |
Apie prekę
The mechanical humidity regulators are used to switch heaters, cooling equipment, filter fans or signal devices on or off if the temperature or humidity value rises above or falls below an adjustable or preset reference value. The regulators must only be used in stationary, sealed housings for electrical devices.
| Switch difference¹ | 4% RH (±3% tolerance) |
|---|---|
| Permissible air velocity | 15m/sec. |
| Contact type | change-over contact |
| Service life | > 50,000 cycles |
| Min. switching capacity | 20VAC/DC 100mA |
| Max. switching capacity | 250VAC, 5A DC 20W |
| Connection | 3-pole terminal for 2.5mm², clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14) stranded wire² 1.5mm² (AWG 16) |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 67 x 50 x 38mm |
| Weight | approx. 60g |
| Fitting position | variable |
| Operating/Storage temperature | 0 to +60°C (+32 to +140°F) / -40 to +60°C (-40 to +140°F) |
| Operating/Storage humidity | max. 95% RH (non-condensing) |
| Protection type | IP20 |
| Approvals | UL File No. E164102, EAC, CQC |
¹ at 50% RH
² When connecting with stranded wires, wire end ferrules must be used.
| Art. No. | Setting range |
|---|---|
| 01220.0-00 | 35 to 95% RH |
