Retrorefleksinis jutiklis stiklui GLV18-55-G/73/120
Prekės kodas: PF.214916
Būklė: Nauja prekė
Gamintojas: PEPPERL+FUCHS
2xPNP NO+NC, stiklo detektavimo ir didelio atstumo režimai.
Pepperl+Fuchs GLV18-55-G/73/120.
Kodas: PF.214916.
1 Vienetas
Charakteristikos
Jutiklio forma | Cilindrinis |
Korpuso (montavimo) dydis | M18x1 |
Medžiaga | Polikarbonatas, PC |
Veikimo atstumas | 0...2500 mm |
Jutiklio ilgis | 43,9 mm |
Produkto tipas | Retrorefleksinis |
Jungtis | M12x1 |
Kontaktų skaičius | 4 |
Išėjimo tipas | 2 PNP complementary |
Maitinimo įtampa | 10-30 VDC |
Darbinė temperatūra | -25°C ... +60°C |
Apsaugos klasė | IP67 |
Jutiklio tipas | Optiniai jutikliai |
Apie prekę
Retrorefleksinis jutiklis stiklinių objektų detektavimui, M18 sriegio trumpas plastikinis korpusas, galimas montavimas beveik lygiai su priekine plokštuma.
2,5 m detektavimo atstumas "stiklo" režime arba 5m "normaliame" režime.
Raudona matoma šviesa, 2 PNP išėjimai NO+NC (light-ON/dark-ON), maitinimas 24VDC, M12 jungtis
- Efficient Line in a short M18 plastic housing for standard applications
- Two devices in one: choice of either clear object detection or retroreflective operating mode with a large detection range
- 4 LEDs indicator for 360° visibility
- Optimized potentiometer design for a clear control button layout in the application
- DC voltage version
General specifications | ||
---|---|---|
Effective detection range | 0 ... 2.5 m in glass mode; 0 ... 5 m in normal mode |
|
Reflector distance | 0 ... 2.5 m in glass mode; 0 ... 5 m in normal mode |
|
Threshold detection range | 6.5 m | |
Reference target | reflector C110-2 | |
Light source | LED | |
Light type | modulated visible red light , 640 nm | |
Polarization filter | yes | |
Diameter of the light spot | approx. 370 mm at 6.5 m ; 50 mm at 1 m | |
Opening angle | approx. 2 ° | |
Optical face | frontal | |
Ambient light limit | 30000 Lux | |
Functional safety related parameters | ||
MTTFd | 1260 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Operation indicator | LED green, statically lit Power on, blinking with 2 Hz or 4 Hz in Teach-In mode |
|
Function indicator | LED yellow: In retro-reflective mode: Lights up when light beam is free; flashing if signal is short of function reserve, off when light beam is interrupted In glass-mode: Lights up when light beam is free; flashing if further compensation is impossible; off when light beam is interrupted | |
Control elements | potentiometer for Teach-In and Mode selection | |
Contrast detection levels | 18 % - clear glass bottles | |
Electrical specifications | ||
Operating voltage | 10 ... 30 V DC | |
No-load supply current | < 15 mA | |
Output | ||
Switching type | light/dark on | |
Signal output | 2 PNP, complementary, short-circuit protected, open collectors | |
Switching voltage | max. 30 V DC | |
Switching current | max. 100 mA | |
Voltage drop | ≤ 1.5 V DC | |
Switching frequency | 1 kHz | |
Response time | ≤ 0.5 ms | |
Conformity | ||
Product standard | EN 60947-5-2 | |
Approvals and certificates | ||
EAC conformity | TR CU 020/2011 | |
Protection class | II, Rated insulation voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 | |
UL approval | cULus Listed, Class 2 Power Source | |
CCC approval | CCC approval / marking not required for products rated ≤36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
Mechanical specifications | ||
Degree of protection | IP67 | |
Connection | 4-pin, M12 x 1 connector | |
Material | ||
Housing | PC | |
Optical face | PMMA | |
Connector | plastic | |
Mass | approx. 10 g |
To select a desirable mode or use the potentiometer in Teach-in mode, worth to use a screwdriver with a PH1 tip. Recommended - WERA Kraftform Micro 2050 series WR.118023.
Rekomenduojamos susijusios prekės
-
Paprastai laikome sandėlyje arba greitai patiekiame