Difuzinis jutiklis OBD8000-R300-2P1-V1-L
Prekės kodas: PF.292666
Būklė: Nauja prekė
Gamintojas: PEPPERL+FUCHS
Stačiakampis, 2 push-pull (4-in-1) outputs, Sn=0.03...8m, jungtis M12x1, 4-pin, ABS korpusas, IP67.
Pepperl+Fuchs OBD8000-R300-2P1-V1-L.
Kodas: PF.292666.
1 Vienetas
Charakteristikos
| Jutiklio forma | Stačiakampis |
| Korpuso (montavimo) dydis | 25,8 x 102 x 54,3mm Stačiakampis |
| Medžiaga | Plastikas, ABS |
| Veikimo atstumas | 30...8000 mm |
| Produkto tipas | Difuzinis jutiklis |
| Jungtis | M12x1 |
| Kontaktų skaičius | 4 |
| Veikimo funkcija | 2 NO/NC reguliuojamas |
| Išėjimo tipas | PNP/NPN |
| Maitinimo įtampa | 10-30 VDC |
| Darbinė temperatūra | -40°C ... +55°C |
| Apsaugos klasė | IP67 |
| Jutiklio tipas | Optiniai jutikliai |
Apie prekę
| General specifications | ||
|---|---|---|
| Detection range | 0.03 ... 8 m | |
| Adjustment range | 0.05 ... 8 m | |
| Reference target | Kodak white (90%) | |
| Light type | modulated visible red light | |
| Laser nominal ratings | ||
| Note | LASER LIGHT , DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS | |
| Laser class | 1M | |
| Wave length | 660 nm | |
| Beam divergence | < 25 mrad | |
| Pulse length | 4 ns | |
| Repetition rate | 250 kHz | |
| max. pulse energy | < 2.4 nJ | |
| Black-white difference (6 %/90 %) | < 0.5 % | |
| Angle deviation | max. ± 2° | |
| Measuring method | Pulse Ranging Technology (PRT) | |
| Diameter of the light spot | vertical 60 mm , horizontal 30 mm at a distance of 2 m | |
| Ambient light limit | 50000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 100 a | |
| Mission Time (TM) | 10 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | 2 LEDs yellow for switching state | |
| Control elements | Sensing range adjuster | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 80 mA / 24 V DC | |
| Time delay before availability | < 0.7 s , for temperatures <-30°C compliance of the specification 5 mins after power on | |
| Output | ||
| Switching type | Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on |
|
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Switching frequency | 50 Hz | |
| Response time | 5 ms | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Laser safety | EN 60825-1:2014 | |
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 | |
| FDA approval | IEC 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Housing width | 25.8 mm | |
| Housing height | 88 mm | |
| Housing depth | 54.3 mm | |
| Degree of protection | IP67 | |
| Connection | 4-pin, M12 x 1 connector | |
| Material | ||
| Housing | Plastic ABS | |
| Optical face | PMMA | |
| Mass | 90 g | |
Jautrumo paderinimui naudoti atsuktuvą su PH1 antgaliu. Rekomenduojamas- WERA Kraftform Micro 2050 serijos WR.118023.
