Diffuse mode sensor OBD1000-R100-2EP-IO-V31

Reference: PF.267075-0127

Condition: New product

Manufacturer:

Rectangular, 2 push-pull (4-in-1) outputs, Sn=2...1000mm, IO-Link, connector M8x1, 4-pin, PC housing, IP67 / IP69 / IP69K. 

Pepperl+Fuchs OBD1000-R100-2EP-IO-V31. 

Code: PF.267075-0127.

This product is no longer in stock

0,00 € tax excl.

Data sheet

Jutiklio forma Stačiakampis
Korpuso (montavimo) dydis 11 x 44,5 x 21,5mm Stačiakampis
Материал Polikarbonatas, PC
Veikimo atstumas 2...1000 mm reguliuojamas
Тип изделия Diffuse Proximity
Коннектор M8x1
Количество контактов 4
Функция переключения 2 NO/NC reguliuojamas
Тип выходов PNP/NPN
Напряжение питания 10-30 VDC
Температура эксплуатации -40°C ... +60°C
Степень защиты IP69K
Тип датчика Оптические датчики

More info

General specifications
Detection range 2 ... 1000 mm
Detection range min. 20 ... 50 mm
Adjustment range 50 ... 1000 mm
Reference target standard white, 100 mm x 100 mm
Light source LED
Light type modulated visible red light
LED risk group labelling exempt group
Diameter of the light spot approx. 65 mm at a distance of 1000 mm
Opening angle 3.7 °
Ambient light limit EN 60947-5-2
Functional safety related parameters
MTTFd 724 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicator LED yellow:
constantly on - object detected
constantly off - object not detected
Control elements Light-on/dark-on changeover switch
Control elements Sensing range adjuster
Electrical specifications
Operating voltage 10 ... 30 V DC
Ripple max. 10 %
No-load supply current < 25 mA at 24 V supply voltage
Protection class III
Interface
Interface type IO-Link ( via C/Q = pin 4 )
IO-Link revision 1.1
Device ID 0x110101 (1114369)
Transfer rate COM2 (38.4 kBit/s)
Min. cycle time 2.3 ms
Process data width Process data input 1 Bit
Process data output 2 Bit
SIO mode support yes
Compatible master port type A
Output
Switching type The switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
/Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Signal output 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop ≤ 1.5 V DC
Switching frequency 1000 Hz
Response time 0.5 ms
Conformity
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Approvals and certificates
EAC conformity TR CU 020/2011
UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
Ambient conditions
Ambient temperature -40 ... 60 °C (-40 ... 140 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width 11 mm
Housing height 44.5 mm
Housing depth 21.5 mm
Degree of protection IP67 / IP69 / IP69K
Connection M8 x 1 connector, 4-pin
Material
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 10 g

To adjust the sensitivity, use a screwdriver with a PH1 tip. Recommended - WERA Kraftform Micro 2050 series WR.118023

Accessories

Download

GET FREE UPDATES!

Sign up today for free and be the first to get notified on our new updates, discounts and special Offers.