FTD 011 (NC/NO), Dvigubas termostatas, Apsaugotas nuo klastojimo (Iš anksto nustatytas) - 01163.0-00
Prekės kodas: ST.01163.0-00
Būklė: Nauja prekė
Gamintojas: STEGO
FTD 011 NC/NO 15/50°C dvigubas termostatas
01163.0-00
Šiuo metu prekės neturime
Charakteristikos
Produkto tipas | Termostatas |
Veikimo funkcija | Combination NC/NO (Šildymas/Aušinimas) |
Maitinimo įtampa | 230V AC |
Temperatūros nustatymo diapazonas | Tamper-proof (Pre-set) |
Maksimali pradinė srovė | AC 16 A for 10 sec |
Darbinė temperatūra | -45°C ... +80°C |
Apsaugos klasė | IP20 |
Patvirtinimai | VDE, UL, EAC |
Apie prekę
- NO and NC in one casing
- Default temperature settings
- High switching accuracy
- Clip fixing
Two thermostats in one casing:
Tamper-proof (Pre-set) Thermostat/Contact breaker (NC) for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. The contact opens when temperature is rising.
Tamper-proof (Pre-set) Thermostat/Contact maker (NO) for regulating filter fans, heat exchangers or for switching signal devices when temperature limit has been exceeded. The contact closes when temperaure is rising.
Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual change-over contacts.
Sensor element | thermostatic bimetal |
---|---|
Contact type | snap-action contact |
Service life | > 100,000 cycles |
Max. switching capacity | 250VAC, 5 (1.6) A / 120VAC, 10 (2) A DC 30W |
Max. inrush current | AC 16A for 10 sec. |
Connection | 4-pole terminal, clamping torque 0.8Nm max.: rigid wire 2.5mm² (AWG 14) stranded wire1 1.5mm² (AWG 16) |
Mounting | clip for 35mm DIN rail, EN 60715 |
Casing | plastic according to UL94 V-0, light grey |
Dimensions | 47 x 63 x 33mm |
Weight | approx. 40g |
Fitting position | variable |
Operating/Storage temperaure | -40 to + 80°C (-40 to +176°F) / -45 to + 80°C (-49 to +176°F) |
Operating/Storage humidity | max. 90% RH (non-condensing) |
Protection type | IP20 |
Approvals | VDE, UL File No. E164102, EAC |
¹ When connecting with stranded wires, wire end ferrules must be used.
Art. No. | Contact breaker (NC) | Contact maker (NO) | ||
---|---|---|---|---|
Switch-off temperature | Switch-on temperature | Switch-on temperature | Switch-off temperature | |
01163.0-00 | +15°C / +59°F (±5K tolerance) | +5°C / +41°F (±5K tolerance) | +50°C / +122°F (±7K tolerance) | +40°C / +104°F (±6K tolerance) |