Fono slopinimo jutiklis (BGS) OBT600-R200-2EP-IO-V31-L

Prekės kodas: PF.295670-100225

Būklė: Nauja prekė

Gamintojas:

Lazerinis difuzinis jutiklis su reguliuojamu fono slopinimu trianguliacijos principu (BGS) 

Stačiakampis, 2 push-pull (4-in-1) outputs, Sn=40...600mm, Smart Sensor, IO-Link, jungtis M8x1, 4-pin, PC korpusas, IP67/IP69/IP69K.

Pepperl+Fuchs OBT600-R200-2EP-IO-V31-L. 

Kodas: PF.295670-100225. 

8 Prekės

170,20 € be PVM

Charakteristikos

Jutiklio forma Stačiakampis
Korpuso (montavimo) dydis 15 x 50,6 x 41,7mm Stačiakampis
Medžiaga Polikarbonatas, PC
Veikimo atstumas 40...600 mm reguliuojamas
Produkto tipas Fono slopinimo
Jungtis M8x1
Kontaktų skaičius 4
Veikimo funkcija 2 NO/NC reguliuojamas
Išėjimo tipas PNP/NPN
Maitinimo įtampa 10-30 VDC
Darbinė temperatūra -40°C ... +60°C
Apsaugos klasė IP69K
Jutiklio tipas Optiniai jutikliai

Apie prekę

General specifications
Detection range 40 ... 600 mm
Detection range min. 40 ... 90 mm
Detection range max. 40 ... 600 mm
Adjustment range 90 ... 600 mm
Reference target standard white, 100 mm x 100 mm
Light source laser diode
Light type modulated visible red light
Laser nominal ratings
Note LASER LIGHT , DO NOT STARE INTO BEAM
Laser class 1
Wave length 680 nm
Beam divergence > 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Pulse length 3 µs
Repetition rate approx. 13 kHz
max. pulse energy 10.4 nJ
Black-white difference (6 %/90 %) < 5 % at 300 mm
Diameter of the light spot approx. 2.5 mm at a distance of 600 mm
Opening angle approx. 0.3 °
Ambient light limit EN 60947-5-2 : 70000 Lux
Functional safety related parameters
MTTFd 560 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicator LED yellow:
constantly on - object detected
constantly off - object not detected
Control elements Light-on/dark-on changeover switch
Control elements Sensing range adjuster
Electrical specifications
Operating voltage 10 ... 30 V DC
Ripple max. 10 %
No-load supply current < 15 mA at 24 V supply voltage
Protection class III
Interface
Interface type IO-Link ( via C/Q = pin 4 )
IO-Link revision 1.1
Device profile Identification and diagnosis
Smart Sensor type 2.4
Device ID 0x111603 (1119747)
Transfer rate COM2 (38.4 kBit/s)
Min. cycle time 2.3 ms
Process data width Process data input 1 Bit
Process data output 2 Bit
SIO mode support yes
Compatible master port type A
Output
Switching type The switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
/Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Signal output 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop ≤ 1.5 V DC
Switching frequency 1650 Hz
Response time 300 µs
Conformity
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Laser safety EN 60825-1:2014
Approvals and certificates
UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
CCC approval CCC approval / marking not required for products rated ≤36 V
FDA approval IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature -40 ... 60 °C (-40 ... 140 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width 15 mm
Housing height 50.6 mm
Housing depth 41.7 mm
Degree of protection IP67 / IP69 / IP69K
Connection 4-pin, M8 x 1 connector, 90° rotatable
Material
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 35 g

Rekomenduojamos susijusios prekės

Atsisiųsti

GAUKITE NAUJIENAS!

Prisijunkite nemokamai dabar ir pirmieji gaukite naujienas, informaciją apie nuolaidas ir specialius pasiūlymus.