Stiprintuvas foto jutikliams PAB 20 A 209

Prekės kodas: TL.PAB20A209

Būklė: Nauja prekė

Gamintojas:

Stiprintuvas foto jutikliams PAB 20 A 209

TELCO PAB20A209

6 Prekės

283,84 € be PVM

Apie prekę

Product Data
Supply Voltage 10 – 30 V dc / 24 V ac
Housing Removable screw terminals
Sensing Range 47m (in 1 channel mode up to 70m, if used together with sensors series 120)
Number of Channels 2
Sensitivity Adjustment Manual
Timer On/Off Delay
Output 2 individual PNP
Technical Data
Supply Voltage 10 - 30 V dc or 24 V ac
Current Consumption Max. 2,3 W
Housing Material Polyamide
Power On Indicator Green LED
Output Indicator Yellow LED
Hysteresis Approx. 35 %
Voltage Tolerance +/- 10 %
Output, Relay -
Output, Transistor 30 V dc / 100 mA
Alarm Indicator Red / yellow LED
LR Sensor Failure Indicator Yelow LED
LT Sensor Failure Indicator Red LED
Master/Slave Address Indicator Green / orange LED
Sensor Monitor LED Drive Green LED on the receiver: ‘Power ON’ Yellow LED on the transmitter: PAB output activated
Response Time ton / toff, Relay -
Response Time ton / toff, Transistor Short range: 18 ms / 18 ms - Long range: 45 ms / 45 ms
Alarm Output, Transistor PNP - 30 V dc / 100 mA
Test Input Yes
Signal Level Indicator Green LED
Operation Frequency, Relay -
Operation Frequency, Transistor Short range: 28 Hz - Long range: 11 Hz
Delay Time ton / toff 0 – 10 sec, adjustable
Environmental Data
Operation Temperature – 10 to +50 °C
Storage Temperature – 40 to +80 °C
Sealing Class IP 40
Buss Rail connector is necessary to connect master and slave

Screwdriver for terminals: slot 0,6x3,5mm
Screwdriver for adjustments: PH0 with shaft up to ø3mm

Rekomenduojamos susijusios prekės

Atsisiųsti

GAUKITE NAUJIENAS!

Prisijunkite nemokamai dabar ir pirmieji gaukite naujienas, informaciją apie nuolaidas ir specialius pasiūlymus.