Difuzinis jutiklis GLV18-8-450/73/120
Prekės kodas: PF.188567
Būklė: Nauja prekė
Gamintojas: PEPPERL+FUCHS
M18 dydis, 2 PNP complementary, Sn=0...450mm reguliuojamas, priekinis optinis veidas, raudona šviesa, įjungta šviesiai / tamsiai, jungtis M12x1, 4-pin, PC korpusas, IP67
5 Prekės
Charakteristikos
| Jutiklio forma | Cilindrinis |
| Korpuso (montavimo) dydis | M18x1 |
| Medžiaga | Polikarbonatas, PC |
| Veikimo atstumas | 0...450 mm reguliuojamas |
| Jutiklio ilgis | 43,9 mm |
| Jungtis | Jungtis M12 |
| Kontaktų skaičius | 4 |
| Išėjimo tipas | 2 PNP complementary |
| Maitinimo įtampa | 24 VDC |
| Apsaugos klasė | IP67 |
Apie prekę
| General specifications | ||
|---|---|---|
| Detection range | 50 ... 450 mm adjustable | |
| Detection range max. | 0 ... 450 mm | |
| Reference target | 100 mm x 100 mm Kodak white | |
| Light source | LED | |
| Light type | modulated visible red light , 640 nm | |
| Diameter of the light spot | approx. 30 mm at 400 mm | |
| Angle of divergence | approx. 4 ° | |
| Optical face | frontal | |
| Ambient light limit | 30000 Lux | |
| Hysteresis | < 15 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, statically lit Power on | |
| Function indicator | LED yellow: lights when object is detected ; flashes when falling short of the stability control | |
| Control elements | sensitivity adjustment | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| No-load supply current | < 20 mA | |
| Output | ||
| Switching type | light/dark on | |
| Signal output | 2 PNP, complementary, short-circuit protected, open collectors | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA | |
| Voltage drop | ≤ 1.5 V DC | |
| Switching frequency | 500 Hz | |
| Response time | ≤ 1 ms | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 60 °C (-13 ... 140 °F) | |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | 4-pin, M12 x 1 connector | |
| Material | ||
| Housing | PC | |
| Optical face | PMMA | |
| Connector | plastic | |
| Mass | approx. 10 g | |
Jautrumo paderinimui naudoti atsuktuvą su PH1 antgaliu. Rekomenduojamas- WERA Kraftform Micro 2050 serijos WR.118023
