Nauja
FPO 018 Filtrų ventiliatorius PLUS (Airflow OUT) 24 m3/h, 230VAC, 92x92mm

FPO 018 Filtrų ventiliatorius PLUS (Airflow OUT) 24 m3/h, 230VAC, 92x92mm

Prekės kodas: ST.01880.0-00

Būklė: Nauja prekė

Gamintojas:

FPO 018 Filtrų ventiliatorius PLUS (Airflow OUT). 

Oro tūris, laisvas srautas: 24 m3/h. 

Oro tūris su išėjimo filtru: 15 m3/h. 

Darbinė įtampa: 230VAC.

Išpjovos dydis: 92x92mm. 

01880.0-00

Šiuo metu prekės neturime

35,55 € be PVM

Charakteristikos

Produkto tipas Filtrų ventiliatorius (Airflow OUT)
Maitinimo įtampa 230V AC
Darbinė temperatūra -40°C ... +70°C
Apsaugos klasė IP54
Patvirtinimai VDE, UL, EAC
Skylės dydis 92 x 92 mm
Oro tūris, laisvas srautas 24 m³/h

Apie prekę

Filter fans are used to provide an optimum climate in enclosures and cabinets with electrical/electronic components. The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents formation of localised hot pockets in installations and protects electronic components from overheating.

The Filter Fan Plus series uses a new airflap-outlet technology for the air outlet and thus reaches a high degree of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. Depending on the application there are two systems that are available - the FPI or FPO system. The FPI system is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is fed into the enclosure (airflow direction "In"). This system consists of a filter fan and exit filter. Whereas in the FPO system, the filter fan is located in the upper area of the enclosure to avoid heat buildups (airflow direction "Out"). The FPO system is composed of an intake filter and exit filter fan. The Filter Fan Plus series may also be used outdoors with appropriate protective measures or when equipped with weather proof accessories, e.g. Hose-proof Hood FFH 086.

Axial fan, ball bearing service life L10 at +40 °C (+104 °F): min. 50,000 h
fan body aluminium, rotor metal
Connection 2 stranded wires, 300 mm
Casing, hood, flaps plastic according to UL94 V-0, light grey;
UV light resistant according to UL746C (f1)
Enclosure cut-out 92 x 92+1 mm
Mounting frame 4 built-in ratchet braces for mounting
(6 notches for wall thickness 1-4 mm).
Additional use of screws possible if needed1.
Filter mat ISO coarse 55 % acc. to ISO 16890 (G3),
initial gravimetric arrestance 57 %
Filter material synthetic fibre with progressive construction, temperature
resistant to +100°C, self-extinguishing class F1,
moisture resistant to 100% RH, reusable
Operating/Storage temperature -40 to +70 °C (-40 to +158 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type/Protection class

IP54 / I (earthed)

Environmental rating UL/NEMA UL TYPE 12 / NEMA 12
Approvals VDE, UL File No. E234324, EAC
Note other voltages on request

1 Drilling marks for screw mounting are indicated on mounting frame.

AIRFLOW DIRECTION "OUT": FILTER FAN FPO 018

Art. No.Operating
voltage
Air volume,
free flow
Air volume
with intake
filter
Current
consumption
(50/60 Hz)
Power
consumption
Average noise level
(DIN EN ISO 4871)
Depth in
enclosure
Weight
(approx.)
Air outlet
01880.0-00 AC 230 V, 50/60 Hz 24 m³/h 15 m³/h 70 mA 12 W 38 dB (A) 72 mm 0.6 kg air-flaps

AIRFLOW DIRECTION "OUT": INTAKE FILTER FPO 118

Art. No.Depth in enclosureWeight (approx.)Filter mat
11880.0-30 22 mm

0.2 kg

ISO coarse 55 % acc. to ISO 16890 (G3),

initial gravimetric arrestance 57 %

FILTER MAT FM 086

Filter class84 x 84 mmInitial gravimetric arrestance1 packing unit
ISO coarse 55 % acc. to ISO 16890 (G3) Art. No. 08633.0-00 57 % 5 pieces

Rekomenduojamos susijusios prekės

Atsisiųsti

GAUKITE NAUJIENAS!

Prisijunkite nemokamai dabar ir pirmieji gaukite naujienas, informaciją apie nuolaidas ir specialius pasiūlymus.