STS 011 (NO), Thermostat, 0-60°C (Cooling) - 01116.0-00
Item code: ST.01116.0-00
Condition: New product
Manufacturer: STEGO
STS 011: Thermostat (NO); contact maker for regulating of filter fans and heat exchangers or for switching signal devices when temperature limit has been exceeded. The contact closes when temperature is rising.
This product is no longer in stock
Data sheet
| Product type | Thermostat |
| Switching function | NO (Cooling) |
| Temperature setting range | 0 ... +60 °C |
| Maximum inrush current | AC 16 A for 10 sec |
| Operating temperature | -45°C ... +80°C |
| Degree of protection | IP20 |
| Approvals | VDE, UL, EAC |
More info
The mechanical thermostat is a two state regulator with small hysteresis.
The setting wheel has an anti frost assurance. The housing ensures an optimized air circulation around the bimetal.
| Switch temperature difference | 4K (±3K tolerance) |
|---|---|
| Sensor element | thermostatic bimetal |
| Contact type | snap-action contact |
| Service life | > 100,000 cycles |
| Max. switching capacity | 250VAC, 10 (2) A / 120VAC, 15 (2) A DC 30W at 24VDC to 72VDC |
| Max. inrush current | AC 16A for 10 sec. |
| Connection | 2-pole terminal, clamping torque 1Nm max.: rigid/stranded1 wire 2.5mm² (AWG 14) |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Casing | plastic according to UL94V-0, light grey |
| Dimensions | 70 x 33 x 42mm |
| Weight | approx. 50g |
| Fitting position | variable |
| Operating/Storage temperature | -45 to +80°C (-49 to +176°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type | IP20 |
| Approvals | VDE, UL File No. E164102, EAC |