Thru-beam sensor OBE12M-R100-S2EP-IO-V31

Item code: PF.280998

Condition: New product


Thru-beam sensor SET (Transmitter + Receiver).

Rectangular, 2 push-pull (4-in-1) outputs, Sn=0...12000mm, IO-Link, connector M8x1, 4-pin, PC housing, IP67 / IP69 / IP69K. 

Pepperl+Fuchs OBE12M-R100-S2EP-IO-V31. 

Code: PF.280998.

5 Items

79,00 € tax excl.

Data sheet

Sensor shape Rectangle
Housing (mounting) size 11 x 44,5 x 21,5mm Rectangular
Material Polycarbonate, PC
Rated operating distance 0...12000 mm
Product type Thru-beam
Connector M8x1
Number of contacts 4
Switching function 2 NO/NC adjustable
Output type PNP/NPN
Power supply voltage 10-30 VDC
Operating temperature -40°C ... +60°C
Degree of protection IP69K
Sensor type Photoelectric sensors

More info

System components
Emitter OBE12M-R100-S-IO-V31
Receiver OBE12M-R100-2EP-IO-V31
General specifications
Effective detection range 0 ... 12 m
Threshold detection range 15 m
Light source LED
Light type modulated visible red light
LED risk group labelling exempt group
Diameter of the light spot approx. 65 mm at a distance of 1 m
Opening angle 3.7 °
Ambient light limit EN 60947-5-2 : 30000 Lux
Functional safety related parameters
MTTFd 462 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicator Yellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Control elements Receiver: light/dark switch
Control elements Receiver: sensitivity adjustment
Parameterization indicator IO link communication: green LED goes out briefly (1 Hz)
Electrical specifications
Operating voltage 10 ... 30 V DC
Ripple max. 10 %
No-load supply current Emitter: ≤ 14 mA
Receiver: ≤ 13 mA at 24 V supply voltage
Protection class III
Interface type IO-Link ( via C/Q = pin 4 )
IO-Link revision 1.1
Device ID Emitter: 0x110401 (1115137)
Receiver: 0x110301 (1114881)
Transfer rate COM2 (38.4 kBit/s)
Min. cycle time 2.3 ms
Process data width Emitter:
Process data output: 2 Bit
Process data input: 2 Bit
Process data output: 2 Bit
SIO mode support yes
Compatible master port type A
Test input emitter deactivation at +UB
Switching type The switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Signal output 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop ≤ 1.5 V DC
Switching frequency 1000 Hz
Response time 0.5 ms
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Approvals and certificates
UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
Ambient conditions
Ambient temperature -40 ... 60 °C (-40 ... 140 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width 11 mm
Housing height 44.5 mm
Housing depth 21.5 mm
Degree of protection IP67 / IP69 / IP69K
Connection M8 x 1 connector, 4-pin
Housing PC (Polycarbonate)
Optical face PMMA
Mass Emitter: approx. 10 g receiver: approx. 10 g

To adjust the sensitivity, use a screwdriver with a PH1 tip. Recommended - WERA Kraftform Micro 2050 series WR.118023

Recommended related products



Sign up today for free and be the first to get notified on our new updates, discounts and special Offers.